Thank you again .. Sir ,,

Hello I see quite a few windshields for heritage and or fat boys from 2000 and up I can’t seem to find out if they would work for my 98 was there some change in dimensions or something that would really say I can’t use it thank you for all your great info have a great day Tom

Thank you for the information ..
Very appreciative ....,

Me again
Odometer black out ;(
The odometer is All with little black dots so you can’t really read it Speedo works and this seems to be a problem and 98 99 mines in 98. A friend has an 06 speedo it’s plug and play ..mine has several wires with eyelets. Is there any suggestion or does anyone know of a way to adapt the 06 to 1998 or just keep looking for a good used Speedo ,which seems to be like looking for hens teeth .....thanks

Then again it’s always something I change the fork oil while it was up on the jackstand and now the right-hand leg I come out after work there’s a puddle a fork oriole it ran down the leg down the caliper around the rotor and under the tire thank goodness there is two brakes on the front tire. Always something guess I better rebuild that leg with some new seals

Again thank you for your help your help bikes back on the road good too because it’s 80°

Thank you for your help

https://youtu.be/fXKYdp8MhbE

Here is mine I know they have been upgraded a few times I was able to get one off of eBay it’s an 08 designation mine was an 08 a designation I was wondering course it’s late now I already bought it if I would get a new one at the dealer would it be one that has the longer numerical designation as part seem to do now I will post a video of what mine sounded like and I do have a picture on the thread that I posted , Of the broken tooth I’m just hoping it is a plastic tooth problem not something the computer made the little motor do that broke it Tx
https://youtu.be/h0hlToXXgj4

I recently started a thread my induction module started chattering I ordered a used one one is there any trick to or a good way or something special about installing the induction module. To a tooth broke off the large gear inside the one that is work or connected to the shaft to the butterfly in the Venturi. One I was wondering if you ever seen this happen Into do you think it just happened because of the plastic tooth breaking off or could it be a signal from the computer that caused it to go the wrong direction when I first turn the ignition on have you ever heard of this thank you very much for your help Tom