HarleyTalking
+ Reply to Thread
Results 1 to 6 of 6

Thread: Wheel Swap

  1. #1
    New Prospect hd4evr's Avatar

    Join Date
    Apr 2016
    Posts
    21

    Wheel Swap

    Will a front wheel and discs from a 2012 FLHRX fit on a 2007 Street Glide? Is it a straight swap?


    https://sandusky.craigslist.org/mpo/...229956006.html


    Click here to enlarge

  2. #2
    Moderator dawg's Avatar

    Join Date
    Dec 2010
    Location
    Vermont
    Bike
    2008 105th Anny Ultra
    Posts
    1,905
    The bearings on the '12 are 25mm as opposed to the 1" on the '07 but they can be changed out. The rotor on the '12 is different due to Brembo brakes as opposed to Nissen on the '07. So the short answer is not a direct swap, however you can (and should anyway) change out the bearings and would have to swap rotors due to the brakes.
    Click here to enlarge I blame soos Click here to enlarge

  3. #3
    New Prospect hd4evr's Avatar

    Join Date
    Apr 2016
    Posts
    21
    Thanks!

  4. #4
    Forum Leader Flame's Avatar

    Join Date
    May 2011
    Location
    Harlem, Georgia
    Bike
    2000 Ultra Classic
    Posts
    697
    And keep your spacers to go into the new rims. And you'll play hell getting the bearings out and installing new ones without a special tool. FU HD

  5. #5
    New Member Liaison Tom's Avatar

    Join Date
    Jul 2010
    Location
    south bend
    Bike
    09 ultra black
    Posts
    17,133
    I bought the pit boss off of Amazon yet inserts and removes bearings of many sizes it was like 70 bucks very handy if you’re going to do things yourself this is a good tool
    From a WW1 RAF Flight Manual ...
    "If a crash at the home airfield is inevitable, try to hit something soft and, preferably, inexpensive"
    Popeye The Sailor - Wimpy The Moocher: http://youtu.be/Q7PFQ7SvH4o

    What a bliss to fight your inner conflicts and wake up with a chaos filled mind. And above all else the streak of sarcasm that wouldn't leave your side
    http://www.youtube.com/watch?v=5m6ly...e_gdata_player
    To our Soldiers, past an present, Thank You an God bless you....... Click here to enlarge...LORD I live by your Will. I shall die when you desire; Save me because you can..." "Never was fount so clear,
    undimmed and bright;
    From it alone, I know proceeds all light
    although 'tis night. .St John of the CROSS.."
    Let me get through today, and I shall not fear tomorrow." ST. Philip Neri.!! **
    May I be "the least in the household of God."...

  6. #6
    Forum Leader Flame's Avatar

    Join Date
    May 2011
    Location
    Harlem, Georgia
    Bike
    2000 Ultra Classic
    Posts
    697
    Click here to enlarge Originally Posted by Tom Click here to enlarge
    I bought the pit boss off of Amazon yet inserts and removes bearings of many sizes it was like 70 bucks very handy if you’re going to do things yourself this is a good tool
    I bought that same one, Tom. The large nut for the tool was coarse thread, while the tool was fine thread. Idjits. I had to buy a couple of nuts, but it was still worth every penny.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

HarleyTalking.com is a privately owned internet discussion forum and is not affiliated with, endorsed by, or sponsored by Harley Davidson, Inc in any way. The Harley Davidson names and logos are trademarks owned by Harley-Davidson, Inc.