HarleyTalking
+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    on rock and roll Hobbit's Avatar

    Join Date
    Jul 2010
    Location
    Where ever the wheels take me
    Bike
    2012 Dyna Switchback and 86' FJ1200
    Posts
    7,758

    Vrod Velocity Stacks

    well there was me thinking i was being clever fitting the lower stack to the front to try and balance the intake and guess what - there BLOODY HANDED arghhhhhhhhh

    front won't fit rear and vice versa
    IMG_1503.jpg
    the top one is the rear stack and the bottom the front stack, rear seems almost symmetrical were as the front has a canted peg ARSE

    right anyone know were i can get stacks the same height that will fit?
    Click here to enlarge
    IBA MEMBER 40172
    SYLO SYLBP

    I'm walking with Sophie tonight, She lives in the air that I breathe;
    I can't get it out of my mind, How you were left to bleed...
    Was it how you dressed?
    Or how you act?
    I can't believe, How they could act so violently,
    Without regret, , Well, we will not forget...

    We are the others, We are the cast outs,
    We're the outsiders, But you can't hide us,
    We are the others, We are the cast outs
    You're no longer on your own, If you feel mistreated, Torn and cheated,
    You're not alone, We are the others

  2. #2
    Senior Member smokenjoep01's Avatar

    Join Date
    Nov 2011
    Posts
    1,073
    Harley Spent lots of money researching the length of those velocity stacks. Why would you want to change them? Isnt your motr displacement stock? Just curious???
    As for the answer to your question. There is nobody I know of doing the stock diameter. Just the bigger Destroyer size. That would be Vance & Hines.
    Actually I did a google search out of curiousity and found this.
    http://www.vhmotorsports.com/product...itystacks.html
    http://www.zippersperformance.com/ca...=588&prod=2127
    BANNED SCUMBAG!

  3. #3
    on rock and roll Hobbit's Avatar

    Join Date
    Jul 2010
    Location
    Where ever the wheels take me
    Bike
    2012 Dyna Switchback and 86' FJ1200
    Posts
    7,758
    joe from research the stacks are unequal length due to the unequal length stock headers and as mine isn't stock i figured what the hell lets see if i can get this tuned better - but its all moot at the mo as the continuous failure is with HD
    Click here to enlarge
    IBA MEMBER 40172
    SYLO SYLBP

    I'm walking with Sophie tonight, She lives in the air that I breathe;
    I can't get it out of my mind, How you were left to bleed...
    Was it how you dressed?
    Or how you act?
    I can't believe, How they could act so violently,
    Without regret, , Well, we will not forget...

    We are the others, We are the cast outs,
    We're the outsiders, But you can't hide us,
    We are the others, We are the cast outs
    You're no longer on your own, If you feel mistreated, Torn and cheated,
    You're not alone, We are the others

  4. #4
    Forum Leader ncvrodracer's Avatar

    Join Date
    Mar 2012
    Location
    High Point, NC
    Bike
    05 VRSCB
    Posts
    890
    The S/E 2 cams come with equal length velocity stacks and are 53mm .. You may be able to order them separate from the kit.. Dynoed my bike with both sets and picked up more peak HP , but lost power in the lower RPM.. Peak gain was 3 hp if I remember correctly.. The stock ones made like 5 more HP from 3000 to 7500.. I run the short ones because I stay above 7500 all the time... Some good comparo on the other forum...

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

HarleyTalking.com is a privately owned internet discussion forum and is not affiliated with, endorsed by, or sponsored by Harley Davidson, Inc in any way. The Harley Davidson names and logos are trademarks owned by Harley-Davidson, Inc.